Lexmark 3455 - Manual (Page 75)

75
6.3.1 AS/400 Recommended Procedure
The IPDS session must be closed after the text job has been sent to the printer to
activate the new IPDS option settings. The changes take effect during the next
established IPDS session.
The following steps are recommended to remotely change the printer IPDS option
settings.
1. End all writers associated with the printer except the writer to be used to send the
text job.
2. Hold all print jobs in the printer job queue to be used to print the option setting
changes.
3. Print the text job with the option setting changes.
4. End the IPDS session with the printer so the option changes will be activated
during the next IPDS session. "Vary Off" the printer for locally attached devices
and end the writer for LAN attached printers to end the IPDS session.
5. Review the IPDS Option Change Status page which was printed for any errors.
6. Recycle the printer power if the operator panel displays the message Recycle
PWR to activate value. This is displayed if the IPDS emulation or the duplex
setting was changed. See section 6.1 Settings That Require Operator Intervention
on page 73 for more information.
7. Print a Print Menus page and review the IPDS default settings to be sure they have
been set correctly.
8. Release queues held in step 1.