Lexmark 3455 - Manual (Page 50)

50
4.5.5 IPDS Multipurpose (MP) Paper
This option selects the default formatting paper size or envelope default formatting size
for the IPDS multipurpose (MP) media source. This option setting applies to the Input
Tray Mappings set to "MP Feeder".
Note: This option only displays if a Multipurpose Feeder is installed.
You can do one of the following:
N
Use the printer setting “MP Feeder Size”.
N
Select a different paper size or envelope size for IPDS.
Selecting a specific size under the IPDS Menu will change the media size selected for
the Postscript and PCL emulations, too. It is recommended that the IPDS value remain
at the default of use Prtr Setting and the specific media size be selected under PAPER
SIZE from the printer's PAPER MENU.
Prtr (printer) Setting* Use the paper size or envelope size from the MP Feeder
Size printer default setting.
PAPER:
Letter Letter paper size (8.5” x 11.0”)
Legal Legal paper size (8.5” x 14.0”)
B5 (JIS) B5 (JIS) paper size (182mm x 257mm)
A4 A4 paper size (210mm x 297mm)
Executive Executive paper size (7.25” x 10.5”)
A5 A5 paper size (148mm x 210mm)
Universal Universal is described on page 49.
ENVELOPES:
7 ¾ Envelope 7 ¾ Monarch envelope paper (3.875” x 7.5”)
9 Envelope 9 Commercial envelope paper (3.875” x 8.875”)
10 Envelope 10 Commercial envelope paper (4.125” x 9.5”)
DL Envelope DL envelope paper (110mm x 220mm)
C5 Envelope C5 envelope paper (162mm x 229mm)
B5 Envelope B5 envelope paper (176mm x 250mm)
Other Envelope Other Envelope is described on page 47.