Lexmark 3455 - Manual (Page 14)

14
2.3 Installing the SIMM for IPDS
Warning: The SIMM for IPDS is easily damaged by static electricity. Make sure to
touch the printer’s metal cabinet before handling the SIMM or wear an
anti-static wrist strap.
Follow these instructions to install the SIMM:
1. Unpack the SIMM for IPDS.
Avoid touching the connection points along the edge of the card. Your card may
vary in appearance. Save the packing materials.
2. Check the printer model and SIMM to be sure you install the SIMM in the correct
Optra model. The printer model number is located on the front or top cover.
Identify the SIMM by looking at the SIMM copyright label.
If the SIMM is labeled “Optra S/Se” and “CE-2” is
written on the copyright label, the SIMM may only be
used in the Optra S/Se models 1255, 1625, 1855, 2455
and 3455.
If the SIMM is labeled "Optra S" and "CE-1" is written
on the copyright label, the SIMM may only be used in
the Optra S models 1255, 1625, 1855 and 2455.
If the SIMM is labeled "Optra S" and the copyright
label is blank, the SIMM may only be used in the Optra
S models 1250, 1620, 1650, 2420 and 2450.
If the SIMM is labeled “Optra K 1220”, the SIMM may
only be used in the Optra K 1220.