Lexmark 3455 - Manual (Page 25)

25
3.2.4 Changing a Numerical Setting
If you choose a menu item that has a numerical value, the item name appears in the first
line of the operator panel display and the numerical value displays in the second line of
the operator panel display.
The current setting has an asterisk (*) next to it.
To increase the numerical value, press Menu>; to decrease the current setting, press
<Menu. The displayed setting changes accordingly. To save the new setting, press
Select. An asterisk (*) is displayed next to the new setting.
For example, if you select MENUS, IPDS MENU, PAPER HANDLING, Top
Margin, you see the following display:
Press Menu> or <Menu to increase or decrease the offset in pels for the default top
margin. Then press Select. The display shows the new settings for one second and then
clears and shows the word SAVED. Press Return to back up the list of menus, or press
Go once to display the IPDS MENU and a second time to display the Ready status
message if this is the last printer setting to be changed. See Activating Saved Option
Changes below.
Another type of numerical value is found if you select MENUS, IPDS MENU,
EMULATION and Default CPI. This option consists of two numbers, which are set
independently of each other. Use Menu> or <Menu to increase or decrease the number
value. Press Select to switch to the second number after setting the first. Press Select
again to save the value. See display below.