Lexmark 3455 User Manual
Page 97
97
3.
Using
CRTPSFCFG
, specify the printer’s TCP/IP configuration information. This
PSF configuration object, which must be saved in library QGPL, overrides the
APPC device description just created with the
CRTDEVPRT
command. See the
example on page 99.
At the command line, type:
CRTPSFCFG
and press <F4>. Enter the following
information:
PSF Configuration
DEVD
OPTRA
(Same user defined name as before)
Library
QGPL
IPDS pass through
IPDSPASTHR
*YES
Release timer
RLSTMR
*SEC15
Press <F10>, then <PAGE DOWN> to access the additional parameters.
Remote location
RMTLOCNAME
157.184.67.102
(IP address or remote host name)
TCP/IP Port
PORT
9100
(9100 or 9600 for MarkNet internal print server)
(9100 for Parallel 1 on MarkNet Pro external print server or MarkNet XLe)
(9102 for Parallel 2 on MarkNet Pro external print server or MarkNet XLe)
Refer to 4.3.14 IPDS Timeout on page 40 for further information on the
selection of ports.
Press <ENTER> to create the PSF object.