Lexmark 5000 Series - Manual (Page 25)

Using a digital phone service
The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone services
can be used.
• If you are using an ISDN telephone service, connect the printer to an analog telephone port (an R-interface port)
on an ISDN terminal adapter. For more information and to request an R-interface port, contact your ISDN
provider.
• If you are using DSL, connect to a DSL filter or router that will support analog use. For more information, contact
your DSL provider.
• If you are using a PBX telephone service, make sure you are connecting to an analog connection on the PBX.
If none exists, consider installing an analog telephone line for the fax machine. For more information on faxing
when using a PBX telephone service, see the related topic, “Setting up to fax while behind a PBX.”
Understanding the control panel
Using the control panel
The display shows:
• Printer status
• Messages
• Menus
• Setting options
1 4 3
5 2
Press To
1 Quick Dial buttons Access any of the first five programmed Speed Dial numbers.
2 Phonebook Access any of the programmed Speed Dial numbers (1–89) or Group Dial numbers (90–
99).
3 Settings Access menus for maintenance functions, paper size and type, printer setup, and printer
defaults.
4 Quality Adjust the quality of a fax, copy, or scan.
5 Display the Fax, Copy, or Scan menu, depending on which mode is selected.
25