Lexmark 5000 Series - Manual (Page 84)

Connecting a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without
using a computer. You can connect a PictBridge-enabled digital camera to the printer, and use either the printer or
the camera to control printing photos.
1 Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2 Insert the other end of the cable into the PictBridge port on the front of the printer.
Note: Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information,
see the camera documentation.
3 If the PictBridge connection is successful, the following appears on the display: PictBridge Camera
detected. Press to change settings.
4 If no selections were specified on your digital camera beforehand, you can use the printer to control printing
photos. Press Select to choose default print settings.
Understanding the PictBridge menu
The PictBridge default settings menu lets you select printer settings if you did not specify the settings beforehand
on your digital camera. For more information on making camera selections, see the documentation that came with
your camera.
1 Connect a PictBridge-enabled digital camera to the printer.
a Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
b Insert the other end of the cable into the PictBridge port on the front of the printer.
Note: The PictBridge port is marked with the PictBridge symbol.
84