Lexmark 5000 Series - Manual (Page 94)

Notes:
• Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, see
the documentation that came with your camera.
• If the PictBridge connection is successful, the following appears on the computer screen: PictBridge
camera detected. Press to change settings.
• Values selected within the menu items are the settings used for PictBridge printing if no explicit selection is
made from the camera.
3 Follow the instructions in the camera documentation to select and print photos.
Note: If the computer or printer is turned off while the camera is connected, you must disconnect and then reconnect
the camera.
Creating and viewing a slideshow
1 From the Productivity Studio Welcome Screen, click Work with Documents and Photos.
2 Select the folder that contains the photos you want to include in the slideshow. Thumbnails of the photos in the
folder will appear in a preview pane.
3 Click to select the photos you want to include in the slideshow, and then select Slideshow.
If you want additional photos to appear in specific order, click the photos in the order you want them to appear,
and then drag them into the “Photos in Your Slideshow” area.
4 Click the Slideshow Settings tab to adjust the amount of time between each photo in the slideshow. You can
also modify the setting that lets the slideshow replay automatically (loop).
5 Click the Share tab to save or print your slideshow.
6 Click View Show in the lower-right corner of the window to start the slideshow.
Note: You can exit the slideshow any time by moving your cursor to the bottom center of the screen and clicking
Exit Slideshow.
94