Perle Systems 833IS - Manual (Page 107)

Chapter 7: Configuring the Protocols
Perle 833IS User Guide 91
Configuring the Protocols
To configure the Protocols:
From the Configuration File window, click on Protocol
The Protocol screen appears. The fields are as follows:
Disable any Protocols that the server does not need to process. A protocol is
disabled by removing the mark in the checkbox. Only the IP and IPX protocols are
enabled by default.
Please note the following:
■ If the IP or IPX protocol is disabled, then any other configuration item that
uses this protocol will not be accessable.
■ If a security feature that uses the IP or IPX protocol has already been
configured, you will not be allowed to disable the protocol.
BCP
To configure Bridge Control Protocol, click the BCP button.
IP
To configure IP, click the IP button.
IPX
To configure IPX, click the IPX button.
PPP
To configure PPP, click the PPP button.