Perle Systems 833IS - Manual (Page 89)

Chapter 5: Configuring the Perle 833IS
Perle 833IS User Guide 73
Removing To remove a Feature Card from the Manager:
1. Click and drag the card you wish to remove over to the Available Cards area.
The card is now removed from the configuration.
Interface This area displays information about the Interfaces in this 833IS. It also is used to
select an Interface to configure.
Slot
The slot of the Interface.
Type
The type of Interface installed in this slot.
Edit
Edits the configuration of the currently selected Interface.
Please refer to Chapter 6 on page 75 for details on "Configuring the Interfaces".
Server
Provides settings for the entire server. See “Chapter 9: Configuring the Server” on
page 163.
Protocol
Access the protocol settings. See “Chapter 7: Configuring the Protocols” on page 89.
User
Access the configuration for the User Database. See “Chapter 8: Configuring the
User Database” on page 135.
Save
Saves the configuration.
Close
Closes the configuration file. If you have made changes, you will be asked if you
want to save them.
Help
Displays Help for this configuration window.