Perle Systems 833IS - Manual (Page 234)

Event Log
218 Perle 833IS User Guide
Event Log
The 833IS has a non-volatile Event Log that is used to track key activities in the
833IS. This user log can be uploaded to the 833IS Manager for display or printing.
The following types of events are recorded:
■ User access (log on, log out, and failed log on activity)
■ Configuration changes through the Manager or Front Panel
■ System restarts
■ Internal 833IS errors
To access the Event Log, the 833IS Manager must connect to an 833IS Server. The
following operations are supported and are accessed through the Manager's Event
Log menu.
Get Event Log
This will get the event log from the connected 833IS and display the data in a
scrollable window. The columns in the table are date, time, event and user ID if
applicable.
Change Log Filter
This command will allow you to change the filtering of the type of events recorded
by the 833IS.
These changes take effect immediately but are not maintained if the 833IS is
powered off. For details on configuring Event Log Filters see page 194.
Clear Event Log
This will clear all the log data from the connected 833IS.