Perle Systems 833IS - Manual (Page 201)

Chapter 9: Configuring the Server
Perle 833IS User Guide 185
Add/Edit Group The Add Group and Edit Group screens allow you to set the parameters for the
group. Fields are as follows:
Group Name
Enter the name you want to assign to the Group. Maximum length is 16 characters.
Enable Group For
These settings allow you to enable a group for:
■ Dial-In.
■ Dial-Out.
■ Callback.
The enable group settings override the settings for any channels and modems
explicitly included in the group.
Lines Use Main Pool
When enabled, the channels for this group will be allocated from the main channel
pool. If a channel is required for Dial-Out or callback, the channel attributes that
were defined in the ISDN BRI Line configuration will be used. For example, if a