Perle Systems 833IS - Manual (Page 206)

SNMP
190 Perle 833IS User Guide
SNMP
Configuration The SNMP Configuration screen is used to set parameters related to SNMP. Fields
are as follows:
Name
Enter the name that the Server will be known as to the SNMP network. This name is
not tied to the Server name that is defined on the main Server configuration screen.
Maximum length is 255 characters.
Contact
Enter the name of the person responsible for managing the 833IS. Maximum length
is 255 characters.
Location
Enter a description of the physical location of the 833IS.
Trap Host When the SNMP Agent in the 833IS detects a serious condition or activity, it will
send a message known as a trap. A Trap Host is an IP workstation that is set up to
receive SNMP trap messages. The Trap Host must be a member of a community
which is known to the SNMP Agent.
The 833IS sends trap messages:
■ When the unit restarts.