Perle Systems 833IS - Manual (Page 84)

Using Configuration Files
68 Perle 833IS User Guide
For Dial-Out, you must configure:
■ Dialout parameters.
■ Server IP or IPX parameters.
Using Configuration Files
The Configuration file contains all the system and user configurations for the 833IS.
Once a file has been created, it can be used to set the configuration for one Server or
as a base for any number of Servers.
Creating To create a new configuration file:
1. From the Manager File menu, select New.
2. The Configuration File window will appear.
If you are NOT currently connected to a server, the New Configuration window will
appear and prompt you to choose which server type you wish to configure.
Opening To open an existing configuration file:
1. From the Manager File menu, select Open.
2. Select the Configuration file from the file list and click "OK".
3. The Configuration File window will display the selected file.
Uploading To upload a configuration:
1. From the Manager File menu, select Server List.
2. The Server List window appears. Select an 833IS from the list.
3. The Log On dialog box appears. Enter a User ID, Password and Server
Password if configured, and click OK. If a Server Password is not configured
then the User must have administrative privileges to proceed.
The default administrative name for an unconfigured 833IS is: User ID: superusr,
no password and no server password.
4. From the Manager Configure menu, select Get Configuration. Or, click the
Get Configuration from the Server quick button.