Perle Systems 833IS - Manual (Page 124)

Configuring IP Protocol
108 Perle 833IS User Guide
Router IP Address
The IP address of the router that will be used to reach the destination.
Add
To configure a new static route, click on the Add button.
Edit
To edit an existing entry, select an entry from the table, and click the Edit button.
Delete
To delete an existing entry, select an entry from the table, and click the Delete
button.
Add/Edit IP Static
Routes The Add/Edit IP Static Route screen is as follows:
IP Address
The IP address of the network that you wish to reach. Although this must be a
complete IP address, any bits that are masked by the subnet mask are treated as 0.
If you have selected Destination type as Host, enter the IP address of the host you
wish to reach.
Subnet Mask
The subnet mask of the network that you wish to reach. If destination type is host, the
subnet mask is automatically set to 255.255.255.255 to ensure that the host address
is uniquely defined.