Perle Systems 833IS - Manual (Page 180)

Configuring the Server
164 Perle 833IS User Guide
If you will be using an SNMP Manager such as HP OpenView to monitor the 833IS,
you will need to set the SNMP parameters.
If you will be using a Sys Log Server to receive the 833IS event log information then
you will need to up the syslog parameters.
Configuring the Server
The Server screens contain the settings that apply to the entire server. For most
installations, the defaults provided will work and no further settings will be required.
To configure the
Server From the Configuration File screen, click on Server.
The Server main screen appears. Fields are as follows:
Server Name
Enter the name you want to assign to the Server. Maximum length is 16 characters.
This name is used for reference only and appears within the Manager and the Front
Panel of the 833IS.
Asset ID
If you wish to assign an Asset ID for the Server, enter it here. Maximum length is 16
characters. Some companies assign an Asset ID to permit them to track their