Perle Systems 833IS - Manual (Page 136)

Configuring IPX
120 Perle 833IS User Guide
Add/Edit IPX Static
Routes The following dialog box will appear if you are adding a new IPX static route, or
editing an existing IPX static route.
Destination Network Number
Enter the network number for the destination network that you wish to reach. The
Network Number is formatted as 1 to 8 hex digits.
Destination Port
Specifies whether the destination is reached via the 833IS’s LAN port or via a WAN
port through a LAN-to-LAN connection. To specify a WAN destination, click on
WAN and then select the desired WAN connection from the drop-down menu. TO
specify a LAN destination, click on LAN and select anetwork number and enter a
node address.
Network Number
Specifies the Network Number for the local router. This must be one of the network
numbers that was configured in the IPX Frame Type section on the previous screen.
Node Address
Specifies the MAC address for the local router. It is formatted as 12 hex digits.