Perle Systems 833IS - Manual (Page 140)

Configuring IPX
124 Perle 833IS User Guide
Add / Edit IPX Filter
Definition To complete or modify the filter definition, enter the information in the following
fields:
Name
The filter name can be up to 8 characters in length. You will use the name to assign
filters to the server or user. The name can be used when adding filters to a user record
on a RADIUS security server.
Filter Action
Select whether to Accept or Reject incoming IPX packets if the packet matches all
parameters defined in this filter. The default setting is Reject.
Source Network Address
The address of the network that contains the station that is sending the IPX packet. It
can be up to 8 characters long.
Source Node Address
Enter the node address of the station that is sending the IPX packet. It consists of 12
hexadecimal characters.