Pitney Bowes J640 - Manual (Page 102)

Record F: Communication Settings
The printer’s communication values must match the host’s.
Use this record to set your printer’s communication values.
Use the following syntax for the Communication Settings
record:
Syntax {I,F,baud,word_length,stop_bits,parity,
flow_control
p
}
n
Changing the communication settings takes approximately two
seconds to complete. Communications during this interval
may be lost.
The following table lists all the parameters you can set using
the Communication Settings record.
Parameter Options Description
Identifier F Communication Settings Record
baud 0
1
2
3
4 1200
2400
4800
9600
19.2K
word_length 0
1 7-bit data frame
8-bit data frame
stop_bits 0
1 1-stop bit
2-stop bits
parity 0
1
2 none
ODD parity
EVEN parity
flow_control 0
1
2
3 None
DTR
CTS/RTS
XON/XOFF
n
The default values are shown in bold.
J640 Programmer’s Manual
5-16