Pitney Bowes J640 - Manual (Page 219)

Error
Code Description
412 There is a problem with flow control between the
printer and the host. Make sure the printer and the
host parity settings match (both are DTR or both are
Xon/Xoff). If the error persists, call Pitney Bowes
Service.
413 Online receive queue is full. Check your printer’s
XON/XOFF or DTR SETUP values to be sure there is
not a flow control problem.
Buffer Errors
414 Internal keyboard buffer is full. Call Pitney Bowes
Service.
415 User defined memory failure. Call Pitney Bowes
Service.
Internal Errors –––––––––––––––––––––––––––––––––––––––––––––
Errors 420 to 499 are internal errors. These errors occur
because of a software problem. Call Pitney Bowes Service.
Error
Code Description
420 Internal software error relating to uploading. Call
Pitney Bowes Service.
421 Internal software error relating to location name. Call
Pitney Bowes Service.
422 Internal software error relating to duplicate name.
Call Pitney Bowes Service.
423 Internal software error. Call Pitney Bowes Service.
J640 Programmer’s Manual
11-14