Pitney Bowes J640 - Manual (Page 211)

Error
Code Description
107 Cut multiple is outside the range 1 to 999. Only valid
for printer with a knife.
108 Multiple part supply is outside the range 1 to 5.
109 Reserved for knife usage. Valid only on printers with
a knife.
Option Errors
200 Option number is invalid. Number is something other
than 1, 2, 3, 4, 5, 20, 30, 31, 40, 41, 42, 43, 50, 51,
52, 60 or 61.
201 Copy length is outside the range 0 to 2710.
202 Copy start position is outside the range
0 to 2709.
203 Destination start position is outside the range 0 to
2709.
204 Source field is outside the the range 0 to 99.
205 Copy type is invalid. Valid options are:
1 Copy after rules
2 Copy before rules
206 Increment/Decrement selection is invalid. Valid
options are I (increment) or D (decrement).
207 Incrementing start position is outside the range 1 to
2710.
208 Incrementing end position is outside the range 1 to
2710.
209 The incrementing amount is outside the range 0 to
999.
J640 Programmer’s Manual
11-6