Pitney Bowes J640 - Manual (Page 163)

Status2
C- Field Number represents the field number within each
packet. The packet header is the first
field and each subsequent field is indicted
by the field separator.
Status2
D- Parameter represents the parameter within the field
that the error occurred. The numbering
begins after the field identifier.
Status2
E- Error Number is the error that coincides with the error
numbers presented in Chapter 11, "Errors."
"FMT-1/BCH-2" The format or batch number is returned.
n
If more than one error occurred then only the most serious
error will be acknowledged.
Example {J,"","F,B,4,6,33","FMT-1","BCH-2"}
This response indicates that an error occurred on a bar code
(B) field within a format (F) packet. The bar code field is the
fourth (4) parameter in the packet. The density is the sixth (6)
parameter in the packet. Error number 33 means the bar code
density is invalid.
n
To clear an error, press the trigger. The printer cannot accept
another job request until the error is resolved.
J640 Programmer’s Manual
8-10