Pitney Bowes J640 - Manual (Page 97)

Example {I,C,-200,-20,-10,0,0
p
}
This record would
✦ identify the print control record.
✦ decrease the contrast by two volts.
✦ move print .1 inch closer to the bottom of the supply
(20/192 inches).
✦ move print .05 inch more to the left on the supply
(10/192 inches).
✦ print at 2 inches per second.
✦ set the supply width to 4 inches.
n
The I parameter is only needed if you send these records
separately. (If you are sending multiple records, the I
parameter is only needed once.) You must resend the format
to the printer before the speed adjustment change takes effect.
Record D: Monetary Formatting
The Monetary Formatting record is used with a price field.
Refer to Chapter 2, "Applying Field Options," for more
information about Option 42.
Use this record to
✦ select primary and secondary monetary symbols.
✦ designate the number of digits you want to appear to
the right of a decimal.
Use the following syntax for the Monetary Formatting record:
Syntax {I,D,dollar,secondary,decimals
p
}
Co
nf
igu
ring
t
h
e P
rin
te
r
Chapter 5. Configuring the Printer
5-11