Pitney Bowes J640 - Manual (Page 83)

Defining the Batch Control Field ––––––––––––––––––––––––––––––
The batch control field defines the print job and applies only to
the batch that immediately follows.
1. Find the Batch Control Field section on your worksheet.
Example {E,0,1,4,2,0,0
p
Syntax {E,feed_mode,batch_sep,print_mult,multi_part,
cut_type,cut_mult
p
2. Select the feed mode. Choose 0 (continuous), or 1
(on-demand) and write your selection in box E2.
3. Decide if you want to use a batch separator. Write 0 (no
separator) or 1 (separator) in box E3.
4. Secify the number of tags to print with the same image.
Write a number from 1 to 999 in box E4.
5. Specify the number of identical parts on one tag. Write a
number from 1 to 5 in box E5.
6. Write 0 in boxes E6 and E7, because this printer does not
have a knife.
E
E1 E2 E3 E5
HEADER
E6 E7 E4
0 0
FEED
-MODE
BATC
H-SEP
PRINT-MULT MULTI-PART CUT-TYPE CUT-MUL
T
Reco
rdin
g Bat
c
h Dat
a
Chapter 4. Recording Batch Data
4-3