Monitor display control – Panasonic WJ-SX 150 User Manual
Page 108
111
The procedure described below lets you determine on-screen display (OSD) items, such as camera title, clock and status, on
and off on the active monitor screen.
Before controlling each item, monitor selection is necessary. (Refer to p. 109 Monitor Selection.)
1. Press the SHIFT button, and then press the numeric buttons corresponding to the function code.
(Refer to the table.)
2. Press the FUNCTION button. The function will be executed.
Notes:
• Alarm History Table doesn't have a function code. When displaying the table, press the ALM RECALL button instead of
the steps 1 and 2 above. "OSD" will appear on the LED display, and the ALARM HISTORY table will appear on the
active monitor.
• You cannot control OSD display position.
MONITOR DISPLAY CONTROL
Function
Code
Controller Status
Note
Displaying the clock
104
Pressing again will hide the display.
Displaying the camera title
105
Pressing again will hide the display.
Displaying the event
106
Pressing again will hide the display.
Displaying the monitor status
107
Pressing again will hide the display.
Displaying all the items
19
Pressing again will hide the display.
Displaying System Status
102
"OSD" appears on the LED.
Pressing again will return to the normal display.
Displaying Video Loss History
103
"OSD" appears on the LED.
Pressing again will return to the normal display.