Panasonic WJ-SX 150 - Manual (Page 82)

84
● Multiplexer Title
● How to Display
To display this window, click on the (Multiplexer Title)
button in the main window (p. 65.)
● How to Display
Note: This window can be displayed only when "Yes" is
selected in the Recorder window. (Refer to p. 66.)
● Parameters
The factory default settings are same as the illustration.
(The text box covered with the cursor is “C”.)
To edit the desired camera’s title, click on the associated
button (Cam 1 to Cam 16).
The subsequent editing procedure is the same as Camera
Title. (Refer to p.79.)
Notes:
The characters available here are the following:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs
t u v w x y z 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * + , -
./:;¨=Æ?oÄÜÖÆÑÃØäüöæñãø
• Up to 8 alphanumeric characters are available for the
multiplexer board camera title.
• You cannot edit a user font character.
(Save Exit) button
Saves the configuration and closes the Multiplexer Board
Camera Title window.
(Cancel Exit) button
Cancels the configuration and closes the Multiplexer Board
Camera Title window.
■ Select Setup Data File
The setup file is selectable by pressing this button.
For example, this function will be used when making a new
setup file with the factory default setting or configuring an
existing setup file.
Refer to the operating instructions of Windows
® for details
of how to copy a data.
● How to Display
To display this window, click on the (File Open) button
in the main window (p. 65).
● Parameters
The location, name and type of the setup file appear in this
window.
File Name Input Area: Displays the selected file's
name. A new file (a setup file with the factory default
setting) will be made when entering a new name.
Open button: Opens the selected file.
Cancel button: Cancels the operation and closes the
Select Setup Data File dialog box.