Level table, Monitor selection – Panasonic WJ-SX 150 User Manual
Page 74
76
■
Level Table
This window configures the restrict level of each operation.
The restrict level is classified in Level 1, 2, and 3.
●
How to Display
To display this window, click on the
(Level Table) but-
ton in the main window (p. 65).
●
Parameters
• Permission
Click on each checkbox to classify the following operations
by three levels.
SX150 Setup:
Setting up this matrix switcher system
Camera Setup:
Setting up the cameras
Alarm History Display:
Displaying the alarm history
Video Loss History Display:
Displaying the video loss
history
System Status Display:
Displaying the system status
Single Alarm Reset:
Resetting an alarm
All Alarm Reset:
Resetting all the alarms
Alarm Suspend:
Suspending an alarm
Camera View:
Selecting a camera
Call Sequence:
Activating a tour or group sequence
Program Preset Position:
Registering a camera's pre-
set position
OSD Control:
Displaying SETUP MENU
Camera Control:
Controlling a camera
Recorder Control:
Controlling the recorder
Recorder Setup:
Displaying the recorder's setup menu
(Save Exit) button:
Saves the configuration and closes the Level Table window.
(EXIT) button
Cancels the configuration and closes the Level Table win-
dow.
■
Monitor Selection
This window determines whether a system controller or PC
can select a monitor.
●
How to Display
To display this window, click on the
(Monitor
Selection) button in the main window (p. 65).
●
Parameters
Select OK to permit each controller and the PC to control
Monitor 1 to 4.
Select NG to restrict each controller and the PC to control
Monitor 1 to 4.
(Save Exit) button
Saves the configuration and closes the Monitor Select win-
dow.
(Cancel Exit) button
Cancels the configuration and closes the Monitor Select
window.