Panasonic WJ-SX 150 - Manual (Page 63)

65
3. When terminating the software, click on the EXIT button
or press the ESC button on the PC keyboard. The main
window will close and WJ-SX150 Administrator Console
will be terminated.
Note: The operator name and password are changeable.
Operator addition is also available. The configuration of
each operator name, password and level are neces-
sary. (Refer to p. 85 Account Manager.)
■ The Main Window
This window appears when starting up WJ-SX150
Administrator Console.
Clicking on each button in the window will display the asso-
ciated configuration window.
Refer to the description of each window for details.
→
The selection will be memorized to WJ-SX150
Administrator Console while launching it.
Note: To change the selection you have done in the
"Startup Menu" window, restart the WJ-SX150
Administrator Console while holding down the SHIFT
key on the PC keyboard.
● Startup/Termination
1. Select "Start" – "Program" – "Panasonic" – "WJ-SX150
Administrator Console x.xx*" or double-click the "WJ-
SX150 Administrator Console x.x" icon on the desktop.
* x.x: Software version
→
The UserID and Password Required window will
appear on the PC screen.
2. Enter "admin" and "sx150" in the boxes "Name" and
"Password" respectively.
Then, click on the OK button.
→
WJ-SX150 Administrator Console starts up and the
main window will appear on the PC screen.
EXIT button
Minimizing button