Panasonic WJ-SX 150 - Manual (Page 113)

117
• The indicator beside the RECORDER button will
light up, and the images from the recorder are dis-
played on the active monitor in multiscreen seg-
ments.
• The CAMERA indicator will go out and the monitor
number with "-H00" will appear on the LED display.
3. To exit from the recorder mode, select the camera.
(Refer to p. 91 Camera Selection.) The indicator beside
the button will go out. The monitor number and camera
number will appear on the LED display again.
You can also exit from the recorder mode by pressing
the RECORDER button during the recorder mode.
Note: Only one operator can enter the recorder mode.
● Multiscreen Segment Switching
Multiscreen segment patterns are configurable through WJ-
HD500 SETUP.
(Refer to the recorder’s operating instructions.)
1. Enter the recorder mode (Refer to p. 116 Recorder.)
2. Press the RECORDER button again. Every time you
press the button, the multiscreen segment patterns are
switched. (The following is the factory default setting.)
4A (Page 1 of the quad
→
Camera 1, 2, 3, and 4)
→
4B
(Page 2 - Camera 5, 6, 7 and 8)
→
4C (Page 3 -
Camera 9, 10, 11 and 12)
→
4D (Page 4 – Camera 13,
14, 15 and 16)
→
7 (segments)
→
9
→
10
→
13
→
16
→
4A
3. To return to the spot display, exit from the recorder
mode.
Note: Multiscreen segment patterns are not configurable
through WJ-SX150 Administrator Console.
● Normal Playback
1. Enter the recorder mode (Refer to p. 116 Recorder
Mode.)
2. To start the playback, press the PLAY button. The sys-
tem will enter the playback mode. Then, the most
recent recorded image will be played back.
• To pause the playback, press the PAUSE button.
• To stop the playback, press the STOP button.
• To resume the playback, press the PLAY button.
• To move forward/backward search during the play-
back, move the joystick rightward/leftward, or press
REW/FF button.
Joystick to R ( B )/FF ( ): Search forward
Joystick to L ( A )/REW ( ): Search backward
• To move forward/backward field advance during
the pause, move the joystick rightward/leftward, or
press REW/FF button.
Joystick to R ( B )/STEP ( ): Forward field
advance
Joystick to L ( A )/STEP ( ): Backward field
advance
• To display the spot picture, press the numeric but-
ton corresponding to the desired camera number,
then press the CAM (SET) button. Then, the active
monitor number with "-H** (** is the camera num-
ber)" will appear on the LED display.
• To resume the multiscreen display, press the button
0 while holding down the SHIFT button.
• To change the number of multiscreen segments,
press the button 0 while holding down the SHIFT
button again during the multiscreen display.
3. To stop the playback, press the STOP button. The mon-
itor display will return to the multiscreen display.
SETUP SHIFT
REW/FF
STEP
GROUP SEQ
PAUSE
F2 TOUR SEQ
PREV NEXT
STOP
OSD
RECORDER
INDEX
STOP PLAY PAUSE
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ON AUX2 OFF EL-ZOOM
AUX1 ON AUX1 OFF STILL
00: Multiscreen display
01 to 16: Spot display (camera number)
RECORDER
UP
L R
DOWN