Panasonic AG-3DP1G - Manual (Page 117)

11
Chapter

Men
u
Oper
ations
Item Setting Notes
ZEBRA1 DETECT Sets the level of the right-leaning zebra pattern 1.
50% ... 70% ... 109%
ZEBRA2 DETECT Sets the level of the left-leaning zebra pattern 2.
50% ... 85% ... 109%
ZEBRA2 Selects ZEBRA2 type. (For details, refer to page 74.)
ON, SPOT, OFF
MARKER Turns the center marker displayed on the LCD monitor
and in the viewfinder on and off. (For details, refer to
page 74.)
ON, OFF
SAFETY ZONE Sets the safety zone displayed on the LCD monitor
and in the viewfinder. (For details, refer to page 74.)
90%, 13:9, 14:9, OFF
FOCUS BAR The length of the focus bar indicates accuracy of
focusing.
ON:
Displays the focus bar.
OFF:
Does not display the focus bar.
• The indication disappears when the
LCD monitor screen is switched to the
R (right lens) image, MIX image, or
Side-by-Side image. The display will
reappear when the L (left) image is
restored.
• The indication disappears when a
menu is displayed.
SYNC SCAN DISP Selects synchro scan shutter display.
sec:
Indicates shutter speed in fractions.
deg:
Provides a shutter angle indication.
• Brightness may change when settings
are modified.
DATE/TIME Sets the date and time display.
TIME:
Hours, minutes and second display
DATE:
Year, month and day display
TIME&DATE: Hours, minutes, seconds and year,
month and day display
OFF: Not displayed
LEVEL METER Sets the Audio Level Meter display.
ON, OFF
ZOOM & FOCUS Sets the display of the lens zoom value and focus
value.
ON, OFF
CONVERGENCE Sets the display of the position of the reference place
for 3D recording (relative value).
ON, OFF
CARD/BATT Sets the remaining P2 card capacity and battery
charge.
ON, OFF
OTHER DISPLAY Sets display of other data.
ON: Displays all data.
OFF:
Not displayed
REC COUNTER Selects counter operation during recording.
TOTAL:
Provides a continuous count until reset by
pressing the COUNTER RESET button.
CLIP:
Clears the count value at start of recording and
counts time of recording.
BATTERY SETUP Screen
Item Setting Notes
EXT DC IN SEL Selects external DC power supply type.
AC ADAPTOR: AC adaptor
BATTERY:
Battery
____ indicates the factory setting