Panasonic AG-3DP1G - Manual (Page 124)

14
Chapter

Maintenance
and
Inspections
Inspecting the Memory Recording
Functions
Make sure you successively carry out the inspections from
[Inspecting the P2 Card Recording] to [Inspecting the
Earphone and Speaker].
Inspecting the P2 Card Recording
1
 CheckontheLCDmonitororintheviewfinder
thattheremainingPcardrecordingcapacity
forbothPcardsissufficient.
For details, refer to [Screen Displays] (page 68).
2
 Pressthecamera’sRECbuttontocheckthe
followingitems:
• The P2 card access LEDs blink in orange.
• The REC indication on the screen lights.
• System warnings do not appear on the screen.
3
 Pressthecamera’sRECbuttonagain.
• Check that the P2 card access LEDs light in
orange, and that the REC indication on the screen
is cleared.
4
 UsingtheRECbuttononthehandle,repeat
Stepsto3tocheckthesameoperation.
5
 UsingtheRECbuttononthelensunit,repeat
Stepsto3tocheckthesameoperation.
6
 PresstheTHUMBNAILbuttontoswitch
thethumbnailscreentoplaybackcurrently
recordedclipfromthumbnail.
• Check that playback is operating normally.
Inspecting the Audio Level Automatic
Adjustment
1
 SettheAUDIOSELECTCH1andCH
switchestoAUTO.
2
 SettheAUDIOINswitchtoFRONT.
3
 AimthemicrophoneconnectedtotheMICjack
atanappropriatesoundsource.Then,check
thattheleveldisplaysforbothCH1andCH
changeaccordingtothesoundlevel.
Inspecting the Audio Level Manual
Adjustment
1
 SettheAUDIOINswitchtoFRONT.
2
 SettheAUDIOSELECTCH1andCH
switchestoMAN.
3
 TurntheAUDIOLEVELCH1andCHcontrols.
• Check that the level display increases when the
controls are turned to the right.
Inspecting the Earphone and Speaker
1
 TurntheMONITORcontroltocheckthatthe
speakervolumechanges.
2
 ConnectanearphonetothePHONESjack.
• Check that the speaker is turned off and the
microphone sound can be heard from the
earphone.
3
 TurntheMONITORcontroltocheckthatthe
earphonevolumechanges.