Panasonic AG-3DP1G - Manual (Page 76)


Chapter
4

Adjustments
and
Settings
for
Recording
Adjusting and Setting the LCD Monitor/Viewfinder
Using the LCD monitor
1
 TurnonthePOWERswitchoftheAG-3DP1.
2
 SlidetheOPENbuttoninthearrow A direction
toopentheLCDmonitor.
 NOTE
The LCD monitor opens to an angle of 90 degrees.
Attempts to open it further will damage the monitor.
3
 AdjusttheangleoftheLCDmonitorformost
convenientviewing.
• The monitor can turn up to 180 degrees towards
the lens and up to 90 degrees towards you.
 NOTE
To prevent camera-recorder failure, do not use force
when adjusting the monitor (when open).
4
 UsethesubscreeninthemenuoptionLCD
SETTINGintheDISPLAYSETUPscreen
toadjustscreencolorlevel,brightnessand
contrast.
For details on menu operation, refer to [Using the
Menus] (page 106).
• At LCD SETTING of the DISPLAY SETUP screen,
select CHANGE.
PUSH MENU TO RETURN
LCD SETTING
LCD BACKLIGHT
ZWBRA1 DETECT
ZWBRA2 DETECT
RETURN
CHANGE
ZWBRA2 SPOT
70%
85%
MARKER ON
EVF PEAK LEVEL 0
EVF PEAK FREQ LOW
DISPLAY SETUP
5
 UsetheJOGdialbuttontoselectanitem.
[ ]
LCD COLOR LEVEL
PUSH MENU TO RETURN
LCD SETTING
[+]
LCD BRIGHTNESS
LCD CONTRAST
[ ] [+]
[ ] [+]
6
 PresstheJOGdialbutton,andturntheJOG
dialbuttontoadjusttheselecteditem.
[ ]
LCD COLOR LEVEL
PUSH MENU TO RETURN
LCD SETTING
[+]
LCD BRIGHTNESS
LCD CONTRAST
[ ] [+]
[ ] [+]