Panasonic AG-3DP1G - Manual (Page 30)

30
Chapter
3

Recording
and
Pla
ybac
k
P2 Cards
Inserting P2 Cards
 NOTE
When using the camera recorder for the first time, be sure to
set the time data beforehand.
For details, refer to [Setting Date and Time of Internal Clock]
(page 28).
1
 TurnonthePOWERswitch.
2
 Openthecardslotcover.
Slotcover
3
 InsertPcardsintheL(left)andR(right)P
cardslots.
• Press in the card until the eject button pops up.
Insertthecardwiththe
logofacingup.
EJECTbutton
4
 Pushtheejectbuttonthatpopsuptotheright.
• The L and R P2 card access LEDs indicate the
status of the corresponding P2 card.
For details, refer to [P2 Card Access LED and Status
of P2 Cards] (page 31).
PcardaccessLED
5
 Closethecardslotcover.
 NOTE
• The camera operates only when P2 cards are inserted in both
the L and R P2 card slots.
• To prevent cards from falling out, dust from entering and
reduce the risk of exposure to static electricity, close the
card slot cover before moving the camera.
• Format two P2 cards simultaneously on this camera.
Removing P2 Cards
1
 Openthecardslotcover.
2
 Raisetheejectbutton.
3
 ThendepresstheejectbuttontoreleasetheP
card.
Raisetheejectbutton. Presstheraisedejectbutton
toremoveaPcard.