Panasonic AG-3DP1G - Manual (Page 53)

53
Chapter
4

Adjustments
and
Settings
for
Recording
Adjustments and Settings for 3D Recording
Switching the LCD Monitor/
Viewfinder Screen
Equipped with two lenses, this camera shoots and records
the image from the left lens (L) and that from the right lens
(R) separately.
You can select the image to be displayed on the LCD
monitor and in the viewfinder with the LCD/EVF button.
The following LCD/EVF modes can be switched over each
time you press the LCD/EVF button.
•NORMAL:
Displays the left-lens (L) image only. This is the normal
display mode automatically set when the camera is
turned on or during playback.
•MIX:
Displays a mixed image, with the images from the left
lens (L) and the right lens (R) superimposed.
•RIMAGE:
Displays the right-lens (R) image only. This mode is
used for 3D FINE operation.
•SIDEbySIDE:
Displays the left-lens (L) image and the right-lens (R)
image side by side on the same screen.
LCD/EVFbutton
• The selected LCD/EVF mode is displayed on the screen.
Refer to [21 LCD/EVF mode display] in [Screen displays]
(page 69).
• The images selectable with the LCD/EVF button can be
changed with the menu option LCD/EVF in the SW MODE
screen.
MIX: NORMAL and MIX modes selectable
MIX/R: NORMAL, MIX and R IMAGE modes selectable
ALL: NORMAL, MIX, R IMAGE and SIDE by SIDE
modes selectable
 NOTE
The LCD/EVF button is disabled in 2D LL recording mode.
Setting 3D Recording Mode
You can select the 3D recording mode with the 3D MODE
selector switch according to the distance of your subject.
•NEAR:
for shooting a subject at a short distance.
•NORMAL:
Normally set to this mode (default setting). It allows
smooth zooming operation.
•EXTRA:
for shooting in telephoto mode. The variable range of
zooming becomes coarse with this mode.
3DMODEselectorswitch
3D MODE
selector
switch
Convergence
point adjustment
range * 1
Variable
range of
zooming
Minimum
object
distance * 1
NEAR
1.1 m – 3.4 m
(C00 – C69)
Z00 – Z80 0.4 m
NORMAL
1.7 m – ∞ m
(C31 – C99)
Z00 – Z80 0.4 m
EXTRA
1.7 m – ∞ m
(C31 – C99)
Z00 – Z99 0.9 m
* 1 The convergence point adjustment range and the
minimum object distance are guides for the distance
between the front of the camera and the subject.
 NOTE
The 3D MODE selector switch is disabled in 2D LL recording
mode. The variable range of zooming is fixed to Z00 to Z99.