Panasonic AG-3DP1G - Manual (Page 122)

1
Chapter

Connecting
to
Exter
nal
De
vices
Connecting the AG-EC4G Extension Control Unit
Some functions can be remote controlled when the AG-
EC4G extension control unit (optional accessory) is
connected to the camera.
When the AG-EC4G is connected, the camera
automatically enters remote control mode after the power
switches of both the camera and the AG-EC4G are turned
ON.
The remote control mode is released when AG-EC4G is
removed or the power for the AG-EC4G is turned OFF.
 Switch/button operations in remote control
mode
The following switches and buttons on the camera do not
work in remote control mode.
• SHUTTER switch
• MENU button
• JOG dial button
• GAIN selector switch
• OUTPUT/AUTO KNEE selector switch
• WHITE BAL switch
• USER MAIN button
• USER 1 button
• USER 2 button
• OUTPUT CHARACTER switch
REMOTEconnector
AG-EC4G
 NOTE
• Be sure to turn the POWER switches on the camera and
the AG-EC4G off before connecting or disconnecting the
controller cable.
• Use only designated cables or designated option cables to
connect the AG-EC4G. Use of other cables could result in
equipment damage.
For details on the current provided by the REMOTE connector,
refer to page 138.
• Data for the operations performed by the AG-EC4G are
generally stored in the camera.
• Setting the DATA SAVE switch on the AG-EC4G to OFF resets
the following values to the values before connecting the AG-
EC4G.
- Synchro scan value
- Master Pedestal value
- GAIN values (R/B)
- Pedestal values (R/G/B)
- GAIN value (at LOW position)
Adjusting the Convergence Point
The convergence point can be adjusted, using the buttons
on the AG-EC4G.
c
b
a
a USER buttons (USER MAIN/USER1)
b RECORDER switch
c t REW, y FF, g STOP and q PLAY buttons
1
 IntheSWMODEscreen,assignRCONVto
theUSERMAINorUSER1button.
2
 PresstheUSERbuttontowhichRCONVhas
beenassignedontheAG-EC4G.
3
 SettheRECORDERswitchtoENABLE.
4
 Adjusttheconvergence,usingthe g STOP
and q PLAYbuttonsforcoarseadjustment
andthe t REWand y FFbuttonsforfine
adjustment.
g STOP, t REW:
to adjust the convergence point
nearer
q PLAY, y FF:
to adjust the convergence point
farther
 NOTE
The USER2 button on the AG-EC4G operates as the
THUMBNAIL button for the camera.