Panasonic AG-3DP1G - Manual (Page 26)


Chapter

P
ar
ts
and
their
Functions
Warning and Status Display
Functions
1 2 4
3
1 Back tally lamp
When the back tally switch is set to ON, this lamp
behaves in the same way as the front tally lamp.
2 Back tally switch
Use this switch to control the back and rear tally lamps.
ON:
Enables the back and rear tally lamps.
OFF:
Disables the back and rear tally lamps.
3 Rear tally lamp
The rear tally lamp behaves in the same way as the
back tally lamp.
4 WARNING lamp
This lamp starts blinking or lights when an error is
detected in the memory card recorder unit.
LCD Monitor
1 2
1 LCD monitor
The LCD monitor displays the video in the viewfinder.
Alternatively, it can show clips on the P2 card in a
thumbnail format.
For details on the setting of the LCD monitor, refer to
[Adjusting and Setting the LCD Monitor/Viewfinder]
(page 76).
In thumbnail display mode, you can use the thumbnail
menu buttons, cursor and SET buttons to manipulate or
delete clips, or format P2 cards.
For details, refer to [Manipulating Clips with
Thumbnails] (page 91).
2 OPEN button
Use to open the LCD monitor.