Panasonic AG-3DP1G - Manual (Page 89)


Chapter
5

Prepar
ation
Attaching/Adjusting Accessories
Mounting the Camera on a Tripod
Use an optional (SHAN-TM700) tripod adapter to place the
camera on a tripod.
1
 Attachthetripodadaptertothetripod.
Tripodadapter
Panhead
 NOTE
Use the holes in the tripod adapter that will make
it possible to position the camera over the tripod
adapter’s center of gravity.
Also, make sure that the diameter of the selected hole
matches the diameter of the pan head screw.
2
 Attachthecameratothetripodadapter.
• Slide the camera forward along the grooves until
you hear a “click”.
Removing the Camera from the Tripod
Adapter
While holding the red lever down, move the black lever in
the direction of the arrow, and slide the camera backward
to remove it.
RedLever BlackLever
 NOTE
If the tripod adapter’s pin does not return to its original
position after the camera has been removed, hold the red lever
down and move the black lever in the direction of the arrow
again, in order to return the pin to its original position.
Please note that the camera cannot be mounted if the pin
remains in the center.
Attaching the Shoulder Strap
Attach the shoulder strap to the shoulder strap bracket.
To detach the shoulder strap, first open the hooks, then
detach the strap.
Presstoopen
thehook.
ShoulderStrap
 NOTE
Makesurethattheshoulderstrapissecurelyattached.
Adjusting the Grip Belt
The length of the grip belt can be adjusted.
Once detach the tape, adjust the grip position then fix it
with the tape again.
 NOTE
Besurethatthegripbeltissecured.