Panasonic AG-3DP1G - Manual (Page 40)

40
Chapter
3

Recording
and
Pla
ybac
k
Special Recording Modes
During P2 card recording, interval recording can be
enabled from the RECORDING SETUP screen.
The interval recording mode is available only with the
following settings:
SYSTEM MODE REC FORMAT Other conditions
1080-59.94i
AVC-I 100/60i
AVC-I 50/60i
720-59.94P
AVC-I 100/60P
AVC-I 50/60P
Turn VFR OFF
1080-50i
AVC-I 100/50i
AVC-I 50/50i
720-50P
AVC-I 100/50P
AVC-I 50/50P
Turn VFR OFF
Interval Recording (INTERVAL REC)
This function is used to record 1 frame at the time interval
set in the INTERVAL TIME item.
1frame
recording
1frame
recording
1frame
recording
(time)
SetINTERVAL
TIMEsetting
SetINTERVAL
TIMEsetting
1
 CheckthattheSYSTEMSETUPscreenisset
upasshowninthelefttable.
For details on menu operation, refer to [Using the
Menus] (page 106).
2
 SelectINTERVALinthemenuoptionREC
FUNCTIONintheRECORDINGSETUP
screen.
3
 SetthetimeinthemenuoptionINTERVAL
TIMEintheRECORDINGSETUPscreen.
4
 PresstheRECbutton.
• The camera will repeat 1-frame recording for the
time interval set in the INTERVAL TIME option.
• Press the STOP button to stop recording.
• To cancel this function, turn the camera off or
select NORMAL in the REC FUNCTION option.
• The following indications appear to the left of the
operation status display.
• During recording: “I-REC” stays lit.
• During a pause: “I-PAUSE” stays lit.
When a setting of less than 2 seconds is made
in step 3, “I-REC” blinks according to time
setting during recording.
• When stopped: “I-” in “I-PAUSE” blinks.
 NOTE
• Sound is not recorded.
• Data recorded (until the STOP button is pressed) in
this mode is recorded as a single file.