Pitney Bowes 1630 - Manual (Page 121)

17 - 9 T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
My headers or footers Most laser printers have a restricted area that
appear when I view my will not accept print. Adjust top and bottom
document on the
margins in your document to allow for this.
screen but do not when
when I print them.
When using ATM If you are using Windows 95/98, select ‘Printer
fonts, some characters Settings’ from the ‘Start’ menu. Open properties.
are missing or some Click ‘Spool Setting’ on the ‘Details’ tab.
characters are printed Select ‘RAW’ from ‘Spool Data Format’.
in the same place.
Cannot perform ‘2 in Check that the paper size setting in the
1’ printing. application and in the printer driver are the
same.
Cannot print when Try to reduce the printing resolution.
using Adobe
Illustrator.
I cannot print from my Make sure the Windows ® printer driver is
application software. installed and you select it in your application
software.
I cannot print from my Check that the DOS application software
application software.
interface settings match those of your printer:
for example, if you are using a parallel printer
cable, you would probably set your DOS
software printer port to LPT1. Check for an
error message on the LCD.
The machine prints, This is an indication that your application
but it prints incorrect printer emulation Print setting and the
information. machine’s printer emulation do not match.
Sometimes Check your application software to make sure
it prints a couple of you selected the correct printer driver. The
characters and then machine emulates HP LaserJet IIP. Select the
ejects the pages, etc. HP LaserJet IIP printer in your application
software.
The machine prints the This is common problem first with database
part of my document
software and part of spreadsheet software when
but does not print the they are not correctly set up. The data has been
last page (The LCD sent to the printer but the printer did not receive
shows REMAINED the Page Eject command. Print another
DATA). document. Then ask your software supplier how
to add a Page Eject (or Form Feed) command to
the end of your print job.
Difficulty Suggestions
General
Printing
Difficulties
(Cont.)
Windows ®
Setup
Printing
Difficulties
DOS Setup
Printing
Difficulties