Pitney Bowes 1630 - Manual (Page 88)

12 - 2 S E T U P F A X M A C H I N E W I T H P C
Connecting Fax Machine to PC
With Bundled Parallel Cable
You must connect the Fax machine to your PC with the included
bi-directional IEEE-1284 compliant parallel cable.
1 Make sure to unplug the machine’s power cord from the electrical outlet
before connecting the parallel interface cable.
Also, make sure the PC is turned off and unplugged from the electrical
power before you connect the interface cable.
2 Connect the parallel interface cable to the parallel interface port of the
machine and secure the connection with the wire clips.
3 Connect the interface
cable to the printer port of
the PC and secure
with the two screws.
For the location of your
computer’s parallel printer
port, see the User’s Guide
for your PC.
4 Before plugging in your PC and turning it on, plug in the electrical cord of
the machine.
If you are using Windows ® 95, after you connect machine to PC. You may
see “New Hardware Found Pitney Bowes 1630” during startup.
You can select “Do not install a driver (Windows ® will not prompt you
again).” and click OK, so Windows ® will not display this dialog box
again.
—OR—
If you see “Update Device Driver Wizard”, click Next to bypass the
Windows
® Plug and Play Printer Driver screens, followed by Finish.
If you are using Windows ® 98, you may see the “Add New Hardware
Wizard” during startup, follow the instructions from the installer, then
click Next. Click Finish when it appears on the screen.