NETGEAR ProSafe WNDAP330 - Manual (Page 22)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
1-8 Introduction
v1.0, May 2008
Front Panel
The WNDAP330 front hardware functions are described below.
The following table explains the LED indicators:
Figure 1-1
Table 1-1. Front Panel LED Indicators
Item LED DESCRIPTION
1 PWR Power Indicator
Off No power.
On Power is on.
2 TEST Self Test Indicator
Blink Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going off.
1
2 3 4 6 5