Figure 2-14 – NETGEAR ProSafe WNDAP330 User Manual
Page 57
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Basic Installation and Configuration
2-31
v1.0, May 2008
3. Enter the following RADIUS Server settings:
•
Authentication Server. This configuration is required for authentication using a RADIUS
Server.The IP Address, Port Number, and Shared Secret are required for communication
with the Primary RADIUS Server. You can also configure a Secondary RADIUS Server to
use, if the Primary RADIUS Server fails.
–
IP Address. The IP address of the RADIUS Server. The default is 0.0.0.0.
–
Port Number. The port number of the RADIUS Server. The default is 1812.
–
Shared Secret. This is shared between the Wireless Access Point and the RADIUS
Server while authenticating the supplicant (wireless client).
•
Accounting Server. This configuration is required for accounting using a RADIUS
Server. The IP Address, Port Number, and Shared Secret are required for communication
with the Primary RADIUS Server. You can also configure a Secondary RADIUS Server to
use if the Primary RADIUS Server fails.
–
IP Address. The IP address of the RADIUS Server. The default is 0.0.0.0
Figure 2-14