NETGEAR ProSafe WNDAP330 - Manual (Page 63)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Basic Installation and Configuration 2-37
v1.0, May 2008
5. Choose WPA with RADIUS from the from the Network Authentication drop-down menu.
Data Encryption will be set to TKIP by default.
6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
7. Click Apply to save your settings.
Configuring WPA2 with RADIUS
Not all wireless adapters support WPA2. Furthermore, client software is required on the client.
Make sure your client card supports WPA2. Consult the product document for your wireless
adapter and WPA2 client software for instructions on configuring WPA2 settings.
To configure WPA2 with RADIUS:
1. Under the Configuration tab, select Security on the main menu, select Advanced from the left-
hand menu, and then select RADIUS Server Settings. The RADIUS Server Settings screen
will display.
2. Enter the RADIUS settings as shown in “ “Configuring the RADIUS Server Settings” on
page 2-30 .
3. Click Apply to save your RADIUS settings.
4. Under the Configuration tab, select Security from the main menu, and then select either
Security Profile Settings for 802.11b/g/n or 802.11a/n. The screen for the Profile Settings you
selected will display. When the Security Profile screen displays, check the radio button of the
Security Profile you want to modify and click Edit.
Figure 2-19