Configuring wep, Configuring wep -34 – NETGEAR ProSafe WNDAP330 User Manual

Page 60

Advertising
background image

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual

2-34

Basic Installation and Configuration

v1.0, May 2008

To configure WEP encryption for Open Systems or Shared Key, see

“Configuring WEP”

on page 2-34

.

To configure WPA with RADIUS, see

“Configuring WPA with RADIUS” on page 2-36

.

To configure WPA2 with RADIUS, see

“Configuring WPA2 with RADIUS” on

page 2-37

.

To configure WPA and WPA2 with RADIUS, see

“Configuring WPA and WPA2 with

RADIUS” on page 2-38

.

To configure WPA-PSK, see

“Configuring WPA-PSK” on page 2-39

.

To configure WPA2-PSK, see

“Configuring WPA2-PSK” on page 2-40

.

To configure WPA-PSK and WPA2-PSK, see

“Configuring WPA-PSK and WPA2-PSK”

on page 2-41

.

8. Wireless Client Security Separation is disabled by default. If enabled, the associated

wireless clients will not be able to communicate with each other.

9. If the hubs/switches on your LAN support the VLAN (802.1Q) standard and this feature has

been enabled, the default VLAN ID for WNDAP330 will be associated with each profile. The
default Profile VLAN ID must match the IDs used by other network devices.

10. Click Apply to save your Security Profile settings.

11. Click Back. Your new settings will appear in the Security Profiles table identified by the

Profile Name of the profile. A VLAN ID will also be assigned to your profile.

To enable your Security Profile:

1. Check the radio box in the Enable column next to your profile.

2. Click Apply. Your Security Profile will be enabled. If you enabled VLAN 802.1Q, your

VLAN Profile will also be enabled. (See

“Setting Basic IP Options” on page 2-13

to enable

VLAN 802.1Q.)

Configuring WEP

To configure WEP data encryption:

Note: Security Profiles that share the same type of network authentication need not

share the same passphrase or keys. Security Profiles that use WEP must share
the same four keys, but they do not need to use the same default key.

Advertising