NETGEAR ProSafe WNDAP330 - Manual (Page 76)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
3-6 Management
v1.0, May 2008
The Web browser used to upload new firmware into the WNDAP330 must support HTTP uploads,
such as Microsoft Internet Explorer 6.0 or above, or Netscape Navigator 4.78 or above.
To upgrade the WNDAP330 firmware:
1. Download the new software file from the NETGEAR website, save it to your hard disk, and
unzip it.
2. Under the Maintenance tab, select Upgrade from the main menu, and then select Firmware
Upgrade. The Firmware Upgrade screen will display as shown in Figure 3-4 .
3. Click Browse and browse to the location of the image (.RMG) upgrade file.
4. Click Apply.
When the upload completes, your wireless access point will automatically restart. The upgrade
process typically takes about 1 minute and 30 seconds.
Figure 3-4