NETGEAR ProSafe WNDAP330 - Manual (Page 81)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Management 3-11
v1.0, May 2008
2. First enter the old password in the Current Password field.
3. Then enter the new password twice—once in the New Password field and again in the Repeat
New Password field.
4. Click Apply to save your change.
Enabling the SysLog Server
The SysLog screen allows you to enable the SysLog option if you have a SysLog server on your
LAN.
To enable a SysLog server:
1. Under the Configuration tab from System on the main menu, select the Advanced option, and
then select SysLog to view the screen shown in Figure 3-9 .
Figure 3-8