N in, Figure 2-6 – NETGEAR ProSafe WNDAP330 User Manual
Page 35
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Basic Installation and Configuration
2-9
v1.0, May 2008
2. Configure the following information:
–
Time Zone. From the pull-down menu, select the local time zone for your wireless access
point from a list of all available time zones. The default is USA-Pacific.
–
NTP Client. Enable NTP Client to synchronize the time of the access point with an NTP
Server. The Default is Enabled.
–
Use Custom NTP Server. Check the option if you have a custom NTP server. The default
is Disabled.
–
Hostname / IP Address. Enter the host name or the IP address of the custom NTP server.
The default is time-b.netgear.com.
3. Click Apply.
Figure 2-6
Note: You must have an Internet connection to get the current time.