NETGEAR ProSafe WNDAP330 - Manual (Page 96)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
4-4 Advanced Configuration
v1.0, May 2008
Hotspot Settings
If you want the wireless access point to capture and redirect all HTTP (TCP, port 80) requests, use
this feature to be “captured” and redirected to the specified URL. For example, a hotel might want
all wireless connections to go to its server to start a billing transaction.
To set up a Hotspot server:
1. From the main menu under Configuration, select System, and then select Advanced. The
Hotspot screen will display, as shown in Figure 4-2 .
2. From the left-hand menu, select Hotspot Settings.
3. Enable HTTP Redirect.
4. Enter the URL of the Web server where you wish to redirect HTTP (port 80) requests.
5. Click Apply. All port 80 requests will now be redirected to the specified URL.
Figure 4-2