Nortel Networks LIP-6830 - Manual (Page 18)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 12 June 07
3.3 Lock/Unlock Configuration
The LIP Phone LCD Menu can be password protected for security. If a password is assigned
and the LCD Menu Locked, the Menu must be unlocked using the password in order to change
any parameter. Otherwise, the configuration data may be viewed only. When the LCD Menu is
locked, a locked padlock icon appears in the upper-right corner of the LCD as shown below.
Locked Display Unlocked Display
To assign a password:
1) Press the button.
2) Press button, or move the cursor to 7.Lock/Unlock Config using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey. If a password has been previously established, the
previous password must be entered, then press the [Chng] Softkey.
3) Enter your new password using the Dial pad and press the [ OK ] Softkey. A password must
be composed of 4-digits.
4) To verify your password, input your new password again and press the [ OK ] Softkey.
5) Press the button to exit the Configuration session and lock the LCD Menu.
To remove a password, press the [None] Softkey in Step 3.
A password must be composed of 4 digits.
When a new password is assigned, the LCD Menu is automatically unlocked.
IP Address
192.168.0.2 IP Address
192.168.0.2
[ » ] [CLR ] [ OK ]
Enter Password Again:
[ » ] [None] [ OK ]
Enter Password:
[ » ] [Chng] [ OK ]
Enter New Password:
[ » ] [None] [ OK ]