Nortel Networks LIP-6830 - Manual (Page 41)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 35 June 07
3.5.2.10 Domain
The Domain specifies the domain for SIP service when the provider desires to use a specific
SIP domain.
To assign the Domain
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 2.SIP Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button in turn, or move cursor to 12.Domain using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
4) Input the Domain for the LIP Phone using the Dial pad.
5) Press the [ OK ] Softkey to save your Configuration.
6) Press the button to exit from the menu.
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E. for
the character mapping of Dial pad digits.
Domain [1]
100.1.1.1
[ » ] [Mode] [ OK ] ¼